Emergency Shower, Recess Mounted, Stainless Steel Shower Head
Application: Emergency shower for recess mounting in a finished ceiling or soffit. Shower is activated by rigid pull rod.
Shower Head: 10″ diameter with flange for flush mounting in ceiling. Shower head is stainless steel with stainless steel face plate.
Valve: 1″ IPS brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm, 43″ stainless steel pull rod and stainless steel ceiling guide plate.
Pipe and Fittings: 1″ IPS galvanized steel.
Supply: 1″ NPT female inlet.
Sign: ANSI-compliant identification sign.
Note: ANSI Z358.1-2014 provides that shower heads be installed no more than 96″ above the finished floor. This unit should therefore not be installed in ceilings over 8 feet. For higher ceiling heights, we recommend the ES658 shower.
- FC20 Regulates shower flow rate to 20 GPM.
- AP280-230 Electric Light and Alarm Horn. Flashing light/alarm horn unit is recess mounted in finished wall. Light is illuminated and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
- TMV AP3800 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2014. Refer to “Tempering Units” section for complete technical and product selection information.