BT385RS

Application: Laboratory water tap with three outlets for cold water.

Finish: Furnished with white powder coated finish as standard. Other colors and finishes available as options (see below).

Mounting: Bench or countertop mounted with removable locator pins.

Bodies: Forged brass.

Headworks: WaterSaver self-contained compression valve cartridges with replaceable stainless steel seats.

Handles: Molded nylon hooded style handles with index discs. Handles and indexes are color coded and marked per EN 13792.

Riser: Brass riser with 6″ (152mm) spread to each side valves.

Spout: 6” (152mm) convertible rigid/swing top spout.

Inlet: Furnished with mounting shank, locknut and washer. G1/2 male inlet.

Outlets: G3/8 female outlets with removable anti-splash serrated hose ends.

Quality Assurance: Fitting is fully assembled and factory tested prior to shipment. 10 bar (150 PSI) test pressure and maximum working pressure.

Optional Features

Finish Options:

• Gray powder coated finish (GRY)
• Polished chrome plated finish with clear epoxy coating (PCL)
• Satin chrome plated finish with clear epoxy coating (SCC)
• Satin nickel plated finish with clear epoxy coating (SNC)

FlowStop/Filter Options:

• FlowStop volume control and shut-off valve installed in valve body (use prefix “BTFS”)
• Removable filter to remove debris and impurities from water flow (use prefix “BTFL”)

Headwork/Valve Options:

• Compression valve cartridge with adjustable volume control (use prefix “BTA”)
• Ceramic disc valve cartridge (use prefix “BTC”)
• Integral check valve to prevent backflow (add suffix “CV”).

Handle Option:

• Forged brass wrist blade handle in place of hooded handle (add suffix “BH”)

Riser Option:

• Brass riser with 8″ (203mm) spread (add suffix “-8”)

Outlet Option:

• BT118 pipe interrupter fitting to prevent back-siphonage (add suffix “-118”)