Push/Turn Gas Valve, Wall/Panel/Overhead Mounted
Application: Control of burning or combustible gases such as natural gas, propane and bottled gas. Valve is certified for natural gas service by CSA International.
Finish: Furnished with white powder coated finish as standard. Other colors and finishes available as options (see below).
Mounting: Flanged inlet with removable locator pins.
Valve Body: Straight pattern forged brass.
Headwork: Self-contained push/turn cartridge with rotating ceramic discs. Valve locks in closed position.
Handle: Die cast metal handle with index disc and pop-up indicator buttons. Handle locks in closed position. Handle must be pushed down to unlock and open valve. Red pop-up buttons indicate if valve is in open or closed position. Handle and index disc are color coded and marked per EN 13792.
Inlet: Furnished with mounting shank, locknut and washer. G1/2 male inlet.
Outlet: G3/8 female outlet with removable serrated hose end.
Quality Assurance: Fitting is fully assembled and factory tested prior to shipment. 10 bar (150 PSI) test pressure, 7 bar (100 PSI) maximum working pressure.
Note: If pop-up indicator buttons are not required, delete suffix “I”. Fitting will be furnished with molded nylon hooded handle.
- Gray powder coated finish (GRY)
- Polished chrome plated finish with clear epoxy coating (PCL)
- Satin chrome plated finish with clear epoxy coating (SCC)
- Satin nickel plated finish with clear epoxy coating (SNC)
- FlowStop volume control and shut-off valve installed in turret base (use prefix “BTFS”)
- Removable filter to remove debris and impurities from media flow (use prefix “BTFL”)
- Integral check valve to prevent backflow (add suffix “CV”)
- Angle serrated hose end in place of straight hose end (order BT4862)