Looking for parts?

Visit wsfpart.com for complete replacement part catalog.

Model Number Search

Find Your Fixture Fast!

BT4880F-226WSA

  • BT4880F-226WSA

BT4880F-226WSA

Needle Valve, Wall/Panel/Overhead Mounted

Application: Flow regulation of all laboratory gases, including special gases such as nitrogen, oxygen, helium and hydrogen. When ordered, valve may be specially cleaned, lubricated and packaged for pure gas service. Valve is certified for natural gas service by CSA International.

Finish: Furnished with white powder coated finish as standard. Other colors and finishes available as options (see below).

Mounting: Flanged inlet with removable locator pins.

Valve Body: Straight pattern forged brass.

Headwork: Floating stainless steel needle and replaceable stainless steel seat.

Handle: Molded nylon hooded style handle with index disc. Handle and index are color coded and marked per EN 13792.

Inlet: Furnished with mounting shank, locknut and washer. G1/2 male inlet.

Outlet: G3/8 female outlet with removable serrated hose end.

Quality Assurance: Fitting is fully assembled and factory tested prior to shipment. 17 bar (250 PSI) nitrogen test pressure, 10 bar (150 PSI) maximum working pressure.

Optional Features

Finish Options:

  • Gray powder coated finish (GRY)
  • Polished chrome plated finish with clear epoxy coating (PCL)
  • Satin chrome plated finish with clear epoxy coating (SCC)
  • Satin nickel plated finish with clear epoxy coating (SNC)

FlowStop/Filter Options:

  • FlowStop volume control and shut-off valve installed in turret base (use prefix “BTFS”)
  • Removable filter to remove debris and impurities from media flow (use prefix “BTFL”)

Valve Options:

  • Integral check valve to prevent backflow (add suffix “CV”)

Outlet Options:

  • Angle serrated hose end in place of straight hose end (order BT4882)
  • Quick connect fitting in place of hose end (order BT4883)
  • 8mm OD compression fitting in place of hose end (order BT4884)