BT5100F-226WSA

Water Valve, Wall/Panel Mounted

Application: Laboratory water valve fitting for wall or panel mounting.

Finish: Furnished with white powder coated finish as standard. Other colors and finishes available as options (see below).

Mounting: Flanged inlet with removable locator pins.

Valve Body: Angle pattern forged brass.

Headwork: WaterSaver self-contained compression valve cartridge with replaceable stainless steel seat.

Handle: Molded nylon hooded style handle with index disc. Handle and index are color coded and marked per EN 13792.

Inlet: Furnished with mounting shank, locknut and washer. G1/2 male inlet.

Outlet: G3/8 female outlet with removable anti-splash serrated hose end.

Quality Assurance: Fitting is fully assembled and factory tested prior to shipment. 10 bar (150 PSI) test pressure and maximum working pressure.

Optional Features

Finish Options:

  • Gray powder coated finish (GRY)

  • Polished chrome plated finish with clear epoxy coating (PCL)

  • Satin chrome plated finish with clear epoxy coating (SCC)

  • Satin nickel plated finish with clear epoxy coating (SNC)

FlowStop/Filter Options:

  • FlowStop volume control and shut-off valve installed in valve body (use prefix “BTFS”)

  • Removable filter to remove debris and impurities from water flow (use prefix “BTFL”)

Headwork/Valve Options:

  • Compression valve cartridge with adjustable volume control (use prefix “BTA”)

  • Ceramic disc valve cartridge (use prefix “BTC”)

  • Integral check valve to prevent backflow (add suffix “CV”)