FE798

Application: All-stainless steel AutoFlow™ eye/face wash for mounting on wall.  Unit is constructed entirely in stainless steel.  Ideal for use in highly corrosive environments, cleanrooms and pharmaceutical applications.  Spray heads swing down from storage to operational position, activating water flow.  Available in a variety of spray head configurations to minimize obstructions at a sink.  Note:  If unit is not installed at a sink, floor drain should be provided underneath unit to prevent accumulation of water on floor.

Spray Head Assembly: Two FS-Plus spray heads.  Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

Valve: 1/2″ IPS stainless steel plug-type valve with PTFE coated O-ring seals. Swinging head assembly down from storage to operational position opens orifice and activates water flow. Unit remains in operation until head assembly is returned to storage position.

Mounting: Valve is installed in Type 316 stainless steel housing.  Mount housing on wall using anchors or other mounting hardware.

Construction: Type 316 stainless steel.

Supply: 1/2″ NPT female inlet.

Sign: ANSI-compliant identification sign.

Quality Assurance: Unit is completely assembled and water tested prior to shipment.

Available Options

• TM6020 Thermostatic mixing valve precisely blends hot and cold water to deliver tepid water as required by ANSI Z358.1-2014. Refer to “Thermostatic Mixing Valves” section for complete technical and product selection information.