Pressure Regulator Fixture, Panel / Overhead Mounted
Application: Point-of-use regulation of high purity gases. Used for compressed air and inert high purity gases, including nitrogen, helium, argon and oxygen. Pressure regulator has elastomer diaphragm and O-ring seals.
Mounting: Fixture is designed for vertical mounting on panel or overhead service carrier. Inlet flange has female inlet and floating escutcheon. Flange can be threaded onto nipple stubbed out of panel. Threaded escutcheon is then backed up to panel to secure fixture and conceal pipe. Alternatively, fixture can be secured to panel with 3/8″ IPS heavy duty mounting shank, locknut and washer.
Shut-Off Valve: Plug valve with lever handle on inlet of pressure regulator for on / off control of service.
Regulator: Non-relieving type with brass body and neoprene diaphragm.
Metering Valve: Fine control needle valve for precise flow control. Valve has forged brass body, floating tapered stainless steel needle and replaceable stainless steel seat.
Inlet Pressure Range: 5-300 PSI.
Outlet Pressure Range: 5-125 PSI.
Inlet: 3/8″ NPT inlet.
Outlet: Removable quick connect fitting with 1/4″ NPT male plug.
Cleaning: Fixture is specially cleaned, lubricated, assembled and packaged for use with high purity gases, including oxygen.
Quality Assurance: Fixture is fully assembled and factory tested prior to shipment.
L2873-366H-758WS Same as above except for horizontal mounting.
Note: If fixture for pipe mounting is desired, delete suffix “758WS.” Fixture will be furnished with 3/8″ NPT male inlet.
Options for Pressure Regulator Fixtures
Outlet. 1/4″ OD compression fitting on outlet in place of quick connect (specify L2874 or L3174 valve).