BT1714BH-WSA

Mixer Tap, Wall/Panel Mounted

Application: Laboratory water mixer tap for hot and cold water.

Finish: Furnished with white powder coated finish as standard. Other colors and finishes available as options (see below).

Mounting: Wall or panel mounted.

Body: Cast brass.

Headworks: WaterSaver self-contained compression valve cartridges with replaceable stainless steel seats.

Handles: Forged brass wrist blade handles with color-coded index discs. Index discs are marked per EN 13792.

Gooseneck: 6” (152mm) convertible rigid/swing gooseneck.

Inlets: (2) G1/2 male inlets on 150mm (6″) center dimension. Furnished with mounting shanks, locknuts and washers.

Outlet: G3/8 female outlet with removable anti-splash serrated hose end.

Quality Assurance: Fitting is fully assembled and factory tested prior to shipment. 10 bar (150 PSI) test pressure and maximum working pressure.

Optional Features

Finish Options:

  • Gray powder coated finish (GRY)

  • Polished chrome plated finish with clear epoxy coating (PCL)

  • Satin chrome plated finish with clear epoxy coating (SCC)

  • Satin nickel plated finish with clear epoxy coating (SNC)

Headwork/Valve Options:

  • Compression valve cartridge with adjustable volume control (use prefix “BTA”)

  • Ceramic disc valve cartridge (use prefix “BTC”)

  • Integral check valves to prevent backflow (add suffix “CV”)

Gooseneck Options:

  • 8″ (203mm) spread gooseneck (add suffix “-8”)

Outlet Options:

  • BO055 aerator in place of serrated hose end (add suffix “-55”)

  • BT118 pipe interrupter fitting to prevent back-siphonage (add suffix “-118”)