BT3160I-231WSA

Application: Control of burning or combustible gases such as natural gas, propane and bottled gas. Valve is certified for natural gas service by CSA International.

Finish: Furnished with white powder coated finish as standard. Other colors and finishes available as options (see below).

Mounting: Turret base with single outlet and removable locator pins.

Valve Body: Angle pattern forged brass.

Headwork: Self-contained push/turn cartridge with rotating ceramic discs. Valve locks in closed position.

Handle: Die cast metal handle with index disc and pop-up indicator buttons. Handle locks in closed position. Handle must be pushed down to unlock and open valve. Red pop-up buttons indicate if valve is in open or closed position. Handle and index disc are color coded and marked per EN 13792.

Inlet: Furnished with mounting shank, locknut and washer. G1/2 male inlet.

Outlet: G3/8 female outlet with removable serrated hose end.

Quality Assurance: Fitting is fully assembled and factory tested prior to shipment. 10 bar (150 PSI) test pressure, 7 bar (100 PSI) maximum working pressure.

Note: If pop-up indicator buttons are not required, delete suffix “I”. Fitting will be furnished with molded nylon hooded handle.

Optional Features

Finish Options:

• Gray powder coated finish (GRY)
• Polished chrome plated finish with clear epoxy coating (PCL)
• Satin chrome plated finish with clear epoxy coating (SCC)
• Satin nickel plated finish with clear epoxy coating (SNC)

FlowStop/Filter Options:

• FlowStop volume control and shut-off valve installed in turret base (use prefix “BTFS”)
• Removable filter to remove debris and impurities from media flow (use prefix “BTFL”)

Valve Options:

• Integral check valve to prevent backflow (add suffix “CV”)

Outlet Option:

• Angle serrated hose end in place of straight hose end (order BT3162)